Within This Page
Since the early 1990s, sustainability has become an increasing priority for facilities projects. It is no secret that building construction and operation have an enormous direct and indirect impact on the environment in terms of energy use, atmospheric emissions, use of raw materials, waste generation, water use, and many other factors. As the economy and population continue to expand, the design, construction and operation community will face increasing challenges to meet the new demands for facilities that are accessible, secure, healthy, and productive while minimizing their impact on the environment.
For the design, construction and operation of a facility, there is an especially important interface between the indoor and outdoor environments, that of the building envelope. The building envelope is comprised of the outer elements of a building—foundations, walls, roof, windows, doors and floors. The prime functions of the building envelope are to provide shelter, security, solar and thermal control, moisture control, indoor air quality control, access to daylight, and views to outside, fire resistance, acoustics, cost effectiveness and aesthetics. Because of the varied and sometimes competing functions associated with the building envelope, an integrated, synergistic approach considering all phases of the facility life cycle is warranted. This "sustainable" approach supports an increased commitment to environmental stewardship and conservation, and results in an optimal balance of cost, environmental, societal, and human benefits while meeting the mission and function of the intended facility.
The main objectives of sustainable design are to avoid resource depletion of energy, water, and raw materials; prevent environmental degradation caused by facilities and their infrastructure throughout their life cycle; and create built environments that are accessible, secure, healthy, and productive.
While the definition of what constitutes sustainable building design, construction and operation is constantly evolving, there are six fundamental principles that nearly everyone agrees on.
Optimize Site Potential—Creating sustainable buildings starts with proper site selection, and the location, orientation, and landscaping of a building affect the local ecosystems, transportation methods and energy use. It is usually more sustainable to renovate an existing building than to tear it down and construct a new one. Consider reuse and retrofit of available existing buildings before deciding to build new.
Optimize Energy Use—A sustainable building should rely on efficiency and passive design measures rather than fossil fuels for its operation. It should meet or exceed applicable energy performance standards.
Protect and Conserve Water—In many parts of the country, fresh water is becoming an increasingly scarce resource. A sustainable building seeks to reduce, control, and/or treat site runoff, use water efficiently, and reuse or recycle water for on-site use when feasible.
Use Greener Materials—A sustainable building should be constructed of materials that minimize life-cycle environmental impacts such as global warming, resource depletion, and human toxicity. Life-cycle raw materials acquisition, product manufacturing, packaging, transportation, installation, use, and reuse/recycling/disposal should all be taken into account.
Enhance Indoor Environmental Quality (IEQ)—The indoor environmental quality of a building has a significant impact on occupant health, comfort, and productivity. Among other attributes a sustainable building should maximize daylighting, provide appropriate ventilation and moisture control, and avoid the use of materials that are high in VOC emissions.
Following are sustainability recommendations pertaining to the design and construction of the building envelope.
Optimize Site Potential
Consider Climatic Conditions—consideration of the local climatic conditions (temperature, moisture, wind) can influence the materials of construction of the building envelope, the amount of and performance of glazing used specific to each orientation, and the overall energy performance of the building.
Reduce Urban Heat Islands—the design of the horizontal elements (roof) of the building envelope should consider the impact on the site's urban heat island. Finish the facility's roof with light colored finish materials or vegetated components to reduce energy loads and extend the life of the roof, especially in warmer climates. Consider incorporating vegetated roof materials. Use a roofing product that meets or exceeds Energy Star Standards.
Optimize Energy Use
- Optimize Thermal Insulation—optimize the insulation performance of the envelope opaque elements for both heating and cooling seasons.
Incorporate High Performance, Spectrally Selective Glazing—the orientation, amount and performance of vertical and horizontal glazing should be appropriate for the climate of the building. Carefully analyze the thermal (U-factor), solar (solar heat gain factor–SHGF) and daylighting (visible transmittance–VT) performance of glazing on each elevation of the building. The performance criteria will vary depending upon orientation and dominant strategy (e.g. solar performance or daylighting performance).
Employ Effective Solar Shading Devices—use exterior shading devices such as overhangs, vertical fins and light shelves as energy efficiency measures (with consideration of maintenance and security/safety issues).
Consider using lighting sensors to control perimeter lighting levels when adequate daylight is available to reduce power and HVAC loads, particularly at peak demand periods which often coincides with times for high daylight availability.
Integrate Photovoltaic Panels—incorporate Building Integrated Photovoltaic (BIPV) panels as part of the building envelope system or solar shading system as a way of generating on-site, renewable energy.
- Analyze Envelope Performance with Energy Simulation—use energy simulation and life-cycle analysis tools to optimize the performance of all components of the building envelope. Make informed decisions about the components of the building envelope based on life-cycle performance.
- Commission Envelope Elements—the building commissioning process should include commissioning of the building envelope to insure that all performance requirements are being met. Commissioning of the building envelope can identify areas of concern related to air infiltration and leakage, moisture diffusion, surface condensation, and rain water entry—all issues that can negatively impact the building's energy performance and indoor environmental quality. Of particular importance is to begin commissioning of the building envelope during design when design modifications can be easily incorporated, rather than waiting until construction when remediation can cost significantly more.
While the LEED® Green Building Rating System requires buildings to undergo Fundamental Building Commissioning of systems to achieve certification, it merely recommends that some form of building envelope commissioning be incorporated. Lemieux and Totten have proposed a Building Envelope Commissioning process that could supplement the Fundamental Building Commissioning required for LEED® certification.
Protect and Conserve Water
Stormwater Management—use a vegetated roof as a means of capturing, filtering and reusing rain water on site.
Captured rainwater on the roof or facade can also be collected, filtered/treated, and then reused on-site for landscape irrigation or toilet flushing, or held and released after a delay to municipal stormwater systems.
Use Environmentally Preferable Products
Evaluate Environmental Preferability Using LCA—employ life-cycle assessment (LCA) tools like ATHENA® Impact Estimator and BEES to evaluate environmental performance of building envelope components or products. Embodied energy (energy required to acquire, manufacture, transport, assemble, install) should be minimized where possible.
Eliminate the use of materials that pollute or are toxic during their manufacture, use or reuse (VOCs, lead, asbestos, PCBs, CFC or HCFC blowing agents for insulation materials). Where possible, evaluate and consider the use of building envelope assemblies that can be easily "de-constructed" at the end of their useful lives.
Maximize Recycled Content—where possible, incorporate recycled content in building envelope construction materials, especially post-consumer recycled content.
Use Wood from Sustainably Managed Forests—when using wood products as part of the building envelope, ensure they are supplied from forests that are certified for their sustainable management practices. Forest Stewardship Council (FSC) certification is mandatory for LEED® projects certified under U.S. Green Building Council programs.
Enhance Indoor Environmental Quality
Value Aesthetic Decisions—windows should be provided that afford building occupants views outside but do not negatively impact the visual and acoustic comfort of the work environment.
Provide Thermal Comfort—components of the building envelope should adequately address issues of thermal comfort at the building perimeter, particularly thermal and solar performance of glazing systems. ASHRAE Standard 55 Thermal Environmental Conditions for Human Occupancy should be used as the basis for thermal comfort analysis.
Maintain Appropriate Indoor Air Quality—design and construction of the building envelope should give appropriate consideration to the moisture dynamics so that water is not transmitted through the building envelope in to the building construction such that indoor air quality is compromised. Where appropriate, consider the use of operable windows for natural ventilation and occupant control, but be careful to consider the effect on the building HVAC system so as not to negatively impact the building's overall energy performance. Use dedicated/separate outside air and conditioned air distribution systems for the building perimeter zones to maintain positive pressurization at the building envelope and appropriate indoor air quality for occupants in the perimeter zones.
Create a High Performance Luminous Environment—design the glazing systems to maximize the use of daylight. Make sure that the electric lighting is controlled to respond to daylight levels to maintain a consistent light level on the work surface in the perimeter spaces. Use internal shades or blinds for glare control (not for control of solar gain) to maintain a healthy visual environment.
Optimize Operations and Maintenance Practices
Preventative Maintenance—building occupants and operators should be appropriately trained in a comprehensive preventative maintenance program to keep all building systems associated with the building envelope functioning as designed.
Balancing Security/Safety and Sustainability Objectives—Providing for sustainable designs that meet all facility requirements is often a challenge to the building design, construction and operation community. With limited resources it is not always feasible to provide for the most secure facility, the most architecturally expressive design, or energy efficient building envelope. From the concept stage through the development of construction documents, it is important that all project or design stakeholders work cooperatively to ensure a balanced design. Successful designs must consider all competing design objectives.
Relevant Codes and Standards
- Environmental Building News
- Field Guide for Sustainable Construction by the Pentagon Renovation and Construction Program Office, Department of Defense. 2004.
- Greening Federal Facilities Guide by U.S. Department of Energy. 2001.
- High Performance Building Guidelines by New York City Department of Design and Construction. April 1999.
- Minnesota Sustainable Building Guidelines by Regents of the University of Minnesota, Twin Cities Campus, College of Architecture and Landscape Architecture.
- Sustainable Building Technical Manual by U.S. Department of Energy and U.S. Environmental Protection Agency. 1996.
- Sustainable Facilities Guide by U.S. Air Force
- Sustainable Federal Facilities - A Guide to Integrating Value Engineering, Life-Cycle Costing, and Sustainable Development by Federal Facilities Council, Washington DC, National Academy Press, 2001.
- Austin Energy Green Building Program
- Green Building Advisor
- Green Buildings, U.S. Environmental Protection Agency
- Leadership in Energy and Environmental Design (LEED®) Green Building Rating System, U.S. Green Building Council
- Sustainable Design and Development Resource Center for the Advancement of Sustainability Innovations (CASI), U.S. Army, ERDC-CERL
- U.S. Department of Energy